top of page


A new standard for data quality and repeatability

RedEdge-P uses purpose-built optical and industrial image sensors combined with narrowband, scientific-grade filters.

We also go through a rigorous factory calibration process to create high-quality, calibrated, robust data for high-quality output.


Twice the resolution of RedEdge-MX
It provides a seamless way to capture not only standard spectral bands, but also advanced spatial resolution.

RedEdge-P uses high-resolution panel color images when flying at 60m.Supports high-resolution RGB and multispectral output with 2cm resolution.

Resolution comparison.png

RedEdge-P sensor specifications



​External power

​Power input

sensor resolution

​Spectrum band

Wavelength (nm)

RGB color output

Ground Sample Distance(GSD)

​Capture speed





8.9 x 7.0 x 6.8cm

7.0V - 25.2V

5.5/7.0/10W (standby, average, peak)

1456 x 1088 (1.6 MP per MS band)

2464 x 2056 (5.1MP panchromatic band)

Blue, Green, Red, Red Edge, near-IR

(Global shutter, narrowband)

Blue (475nm centered, 32nm bandwidth)

Green (560nm centered, 27nm bandwidth)

Red (668nm centered, 14nm bandwidth)

Red Edge (717nm centered, 12nm bandwidth)

near-IR (842nm centered, 57nm bandwidth)

5.1MP (global shutter, consistent with all bands) 

​*Includes appropriate post-processing

7.7cm per pixel at 120m AGL (MS band)

3.98cm per pixel (panchromatic band) at 120m AGL

​Capture up to 3 raw DNGs per second

3 configurable GPIOs: trigger input, PPS input, PPS output and frame top signal selection, USB 2.0 port for WiFi, CFExpress for storage

50˚HFOV x38˚VFOV(MS)


CFExpress Card

bottom of page